|
|
 Weasel-evo
"Axis of Weasel"
Limited Edition, Black EPP
Kit |
Now Available for
Order!
Limited Quantity Remaining |
"Axis of Weasel"
Limited Edition Kit
Kit Price: $95.00
Ships within 2 weeks of
purchase date.
*International Shipments (non US) of
Limited Edition kits will only be shipped by USPS Priority Mail International
which includes tracking. As a result shipping rates for this specific kit will
be higher. |
Looking to set yourself apart from the flock? If
you are a slope aficionado, R/C collector, or simply a Weasel fanatic, then
this kit is a must have! We've taken the classic Wevo kit and added a few
twists to make it extra special for the diehard Weasel connoiseur. These are
the LAST Weasel-evo EPP airframes that will be available through
dream-flight.com, since the standard kit will now be available in EPO foam
only. There are only a limited number of these available, so get yours before
we run out!
The limited edition kit features the
following:
»
Limited edition BLACK precision-molded EPP airframe (standard kit is white
EPO). We find that this black airframe hides dirt and scuff marks better, and
to boot, it simply looks striking!
» Pre-cut and drilled balsa
control surfaces for ultra quick assembly.
» Includes "Axis of
Weasel" cut vinyl decal pack.
 » Includes
spare plastic belly skid
» Each airframe is individually
hand-signed by the designer, Michael Richter.
» Packaged in
Dream-Flight's trademark blue box.
» Only available through
Dream-Flight.com ! |
Glider
Specifications:
Flight
Characteristics: Tough, agile and extremely maneuverable. Very
Aerobatic, yet stable.
Wingspan: 35.4 in (900mm)
Wing area:
362 sq.in (23.3 sq.dm)
Weight range: 11-13 oz (312-370gm)
Wind
Range: 5-30mph with decent slope
Skill level: Beginner to
expert
Kit building time: 1 - 4 hours
Minimum radio
requirements: 2 channel, elevon mixing with dual rates and/or ATV
(Adjustable Throw Volume), micro radio components (see below for
details). |
*Requires assembly. Kit includes complete
hardware package and airframe. NOT included are basic tools, radio gear,
adhesives, and covering film. Read below for more information regarding basic
kit features.
 |
Kit
Features:
- Resilient molded BLACK EPP airframe for
fast, consistent, and easy assembly. Airframe manufactured in the
USA!
- Hatch cover
system allows for quick switch and charging access.
- Thermo-formed
belly skid for landing protection.
- Quick-assembly kit can be built in one evening with little
or no glue. Say goodbye to the taping blues!
- Modular
airframe can be built as one piece for maximum durability or collapsible
with our original magnet lock system for easy travel and storage.
-
Hand-selected and trimmed balsa control surfaces for maximum durability,
flight precision, and easy replacement.
- New wing design
with fully encapsulated carbon-fiber spars and internally routed
fiberglass joiner tube - super clean and aerodynamic!
- Enhanced
inverted flight performance
- Carbon-Fiber
Pushrod System for minimal weight
- Complete
hardware package includes lightweight carbon-fiber pushrod system and
decals, just to name a few.
- Detailed
construction manual (of course, if you've built a few of these, you may not
even need it!)
 POPULAR
ACCESSORIES FOR THE WEASEL:
| Image |
Item |
Includes |
Price |
 |
Standard
Flight-Pack for
Weasel-evo
Includes
servos by: |
(2)
BMS-380MG metal geared servos
(1) 4.8V 700mAh NiMH battery
(1)
Switch/Charging Harness, Universal connectors
10% SAVINGS
UNBEATABLE
DEAL! |
$50.50
(Save $6.50)
Ships after
May 18, 2012.
Pre-order only
|
 |
Precision
Flight-Pack for
Weasel-evo
Includes
servos by:
|
(2)
Hitec HS-82MG metal geared servos
(1) 4.8V 700mAh NiMH battery
(1) Hitec
Switch/Charging Harness
|
$57.98
|
 |
Battery for
Weasel-evo
Rechargeable
Tips on using NiMH
batteries... |
4.8V
750mAh NiMH
(5/4AAA Square Pack)
Weight: 51g
Size:
46x21x21mm
Connector: Universal
Charging Rates:
Trickle:
50-100mA
Maximum: 700mA
|
$9.50
|
 |
Switch Harness for Weasel-evo
|
A
lighter weight switch and charging harness for the Weasel-evo. We have this
switch custom made for us with shorter wires!
Weight: 8g
Size:
26x11x16mm
Connectors: JR/Hitec
|
$8.50
Ships after June 7, 2012.
Pre-order
only
|
| |
Belly Skid for
Weasel-evo, Clear |
Part
"E" from Manual
Plastic "belly skid"
(i.e. bottom protective
canopy)
Clear plastic can be
painted on interior surface to eliminate paint scuffing. |
$4.00
|
 |
Lightweight Strapping Tape
(1/2" x 60 yards) |
1/2"
wide fiberglass reinforced tape for strengthening foam airframes. |
$3.50
|
 |
INSTA-CURE™
(½oz bottle) |
Thin
Instant Glue
(Cyanoacrylate Adhesive)
Required during assembly of both the Weasel
and Alula evo-series gliders. |
$3.00
|
Items required for completion:
| Qty. |
Item |
Details |
Availability |
| 1 |
R/C Transmitter |
Elevon or V-Tail mixing and adjustable rates (i.e. control throws).
Hitec Neon single stick radio with ATV upgrade is a good entry-level
transmitter. We also like the Hitec Optic 6 computer transmitter for its extra
versatility. |
N/A |
| 2 |
Micro Servos |
Metal gears recommended for added durability and longevity. Blue-Bird
BMS-380MG, Hitec HS-82MG, or similar size/weight servos. |
Purchase |
| 1 |
Micro Receiver |
Mikro5 Receiver for economy and minimal weight or Hitec Electron-6 for
crowded flying environments. |
Purchase |
| 1 |
Rechargeable 4.8V Battery Pack |
4.8V 700mAh AAA-size NiMH square pack or equivalent (Standard item
included with our Weasel-evo flight packs) |
Purchase |
| 1 |
Switch and wiring harness |
Our standard switch harness (Standard item included with our
Weasel-evo flight packs) |
Purchase |
| 1 |
Flexible all purpose adhesive/contact- cement/sealant |
Required for three piece wing option or to permanently glue wing
panels together.
Adhesive must contain toluene (toluol) to bond to EPP
foam. GOOP, Surebonder9001, or "UV6800" brands are suitable. |
Purchase |
| 1 |
Medium or thin instant adhesive |
CA glue (cyanoacrylate) |
Purchase |
| N/A |
Covering material |
Highly recommended! For maximum durability and customization,
apply clear tape to airframe (1 roll will suffice). Strapping tape is also
recomended for airframe reinforcement. |
Purchase |
| N/A |
Tools and Extras |
Painter's masking tape
Sharp Scissors
Sharp hobby knife or razor
blade
Old credit card or plastic squeegee
Small screw drivers
Wooden
stick for applying glue
Coins and/or small weights for balancing
glider
Sanding block and sandpaper (fine to medium grit)
|
N/A |
|
|
|
